RFD900X Digital Radio Module Factroy 40km Long Range Data Link Modem Manufacturer Flight Control Transmission Radio Drone Supply Transmission UAV UAS UGV US
RFD900 + and RFD900X main difference is that the RFD900 + can only be one-to-one, while the RFD900X can be one-to-many, suitable for clustering, group control and other projects
The following cables of FTDI are compatible with RFD900 modems. FTDI cable pin 1 connected to the RFD 900 connector pin 1 of the connector.
To power the modem with a +5V USB power supply, a jumper needs to be connected between pins 4 and 6
To power the modem from an external +5V power supply, connect the power supply to pins 2 and 4.
RFD900X |
The RFD900x is a high performance 900 MHz ISM band radio modem covering the 902-928 MHz frequency band. It is designed for remote serial communication applications that require good radio link performance. |
What's New in the X-Series |
New processor, ARM 32-bit core |
Air data rate 500kbit/ s |
AES Hardware Accelerated Encryption |
RC PPM with telemetry is also available |
For more information on GPIO pins, see the data sheet |
Open Source Firmware SiK |
Available with one-to-many firmware, "beta" |
Main features |
Long range > 40km, depending on antenna and GCS settings |
2 RP - SMA RF connectors, diversity switching |
1 W (+30dBm) transmit power |
Emission low-pass filter |
>20dB low noise amplifier, high IP |
RX SAW Filters |
Passive front-end bandpass filter |
Each IO port is protected by ESD and over |
Re-implemented SiK and multi-point SiK firmware, field upgradeable and easy to configure |
Small size and light weight |
Free license for use in Australia, Canada, USA, New Zealand |
Note: Not compatible with older "+" series modems with current software |
Specification |
Frequency range |
902-928 MHz /915-928 MHz/868-870 |
Output power |
1W (+30dBm), can be controlled in 1dB steps (+/-1dB@<20dBm,+/-0.5dB>=20dBm typical) |
Over-the-air data transfer rate |
4,64,128,250,500 kbit / sec |
UART Data Transfer Rate |
2400,4800,9600,19200,38400,57600,115200 |
Reception sensitivity |
>121 dBm at low data rates, high data rates (TBA) |
Size |
30mm x 57mmx12.8mm |
Weight |
14.5g |
Installation |
3 x M2.5 screws, 3 x row of pins soldering points |
Power supply |
Nominal +5V (min. +3.5V, max. +5.5V), approx. 800 mA peak at maximum power |
Temperature |
-40ºC~85ºC, the test operation environment is -73ºC~123ºC under operation |
Interface |
RF |
2 xRP - SMA Antenna Connectors |
Serial |
Logic level RS232 (+3.3v nominal, +5v withstand voltage) |
Power |
+5v,~800mA maximum peak (at maximum transmit power) |
GPIO |
6 general purpose IOs (with digital, ADC and PWM functions) |
Company Profile
Company Introduction
Shenzhen Xingkai Technology Co., Ltd. is a Global leading high-tech enterprise engaged in R&D development and production of RF wireless communication systems for the broadcast, public surveillance, and defense industries.
Our R&D team has over 20 years of professional technical experience in design, develop, build, support and delivery ot end-to-end communications&advanced networkings. The company attaches great importance to the construction of the R&D team, with a team who with extensive industry experience and accumulation in the fields of RF communication, Baseband unit, and images processing.
Our products range includes mimo mesh network, tactical radio, software detined radio, tactical data link, ip encoder, there has also been continued demand in the areas of C2/C3/C4ISR/C5ISR mission systems, border and perimeter security systems, unmanned aircraft systems, unmanned surtace vessels, remote controlled systems, and homeland security solutions, law enforcement and also covering film, broadcast and live stream activities that who can't risk communication failure.
Exhibitions
Testing Instruments
Certification

Cooperative Partners
FAQ:
Q: Who we are?
A: We are a Global leading high-tech enterprise engaged in R&D development and production of RF wireless communication systems for the broadcast, public surveillance and defense industries.
Q: Could you support OEM&ODM ?
A: We are able to offer you the best solutions on market by providing you OEM/ODM service.
Q. How long is the delivery time ?.
A: Normally small quantity orders will be dispatched within 2-5 working days after receiving payment. For bulk order, we will ship out within 10-15 days..
Q. How do we make a business long term and good relationship with you?
A. We will protect our partner's profit by providing them with good quality products and competitive prices. We treat every customer as a friend and do business with everyone sincerely. no matter where they come from.
Q: How can you guarantee quality?
A: For all systems before shipment, will undergo a series of tests, including vibration testing, test for functional interface&RF indicators&sensitivity¶meter settings, high and low temperature testing, trial aging testing, test the interface and all wiring, field testing outsides etc.
Q: What is your usual payment terms for orders?
A: T/T, Western Union