1.2GHz Video Receiver with Raceband for Drones Analog Modules for Skyzone Dji V1 V2

• Customization: Available
• Transport Package: Carton
• Specification: 6*5*5
• Model NO.: 1.2Ghz 1.3Ghz VRX
• Trademark: Xingkaitech
• Origin: China

Product Description

Main Features
•Channels: 9 CH
•Supports direct connection with Fat Shark,
Sky zone, and other VR goggles head-mounted displays and simulation displays.
•  High sensitivity reception:-97dBm
•  Efficient DC/DC power support: 7-36V
•Supports 5V power output
•  Easy touch button for quick channel switching

Product Parameters
•  Receiver(Ground Station):
•  Input Voltage:DC 7-36V(2-6S)
•Output Voltage : 5V/0.5A
•WGT : 18g(Accessories not included)
•Video Format:PAL/NTSC
•Channels: 9 channels
•Channel Selection: Short press to switch frequency
•  Reception Frequency:1080-1360 MHz
•Sensitivity:-97 dBm(MAX)
•Antenna Interface: SMA (internal thread and hole)
•  Modulation Type:FM

Transmitter Operation Adjustment Section:

1,Channel Table

 

CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8	CH9
1120	1160	1200	1240	1258	1280	1320	1360	1080

 

 

2,Channel Adjustment Using a Single Button
Adjust the channel by short pressing the button, as shown in the diagram below:

Channel Control Short press the button to switch channels:
Channels	CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8	CH9
	1120	1160	1200	1240	1258	1280	1320	1360	1080
The RED indicator light constantly on	1	2	3	4	5	6	7	8	9

Precautions:
• Please install the antenna before connecting the power to avoid damage to the equipment.
• Select the appropriate working frequency, and ensure the transmitting and receiving ends are set
to the same frequency (see frequency table for details). •  The input voltage is 7-36V (2-6S), please do not exceed this voltage range.
• The output voltage and current are 5V/0.5A. Be careful if you need to use the receiver to supply power to other devices; the working current limit is 0.5A. Exceeding this limit may damage the
receiver.
•  Please do not use this product's power output port to power other devices as it may cause damage to the receiver.
•  Both the 5V and 5V-OUT are output terminals, do not connect them to the power input or battery, as this will cause damage.